Rigging

Handy Lock Turnbuckle Jaw/JawThe 01 Series Handy Lock turnbuckle is one of our oldest products and still stands the test of time. Neat and compact ...

Quick Release Shroud Adjuster - 1/4 PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be o...

Quick Release Lever - 5/16 PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing o...

Quick Release Lever - 1/4 PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing on...

Double Jaw Rigging Toggle - 3/8 PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and...

Double Jaw Rigging Toggle - 5/16 PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes an...

Double Jaw Rigging Toggle - 1/4 PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes and...

Rigging Toggle - 5/16 PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also us...

Hinged Mini Pad Eye - 3/16This pad eye is a smaller version of our popular #48-580 pad eye. This unit is suitable for awnings and many other tie-do...

"Captain Hook" Chain Snubber Large Snubber Hook Only (1/2" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few differ...

"Captain Hook" Chain Snubber Large Snubber Hook for 3/8" 1/2" Chain with 15' of 5/8" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used in...

"Captain Hook" Chain Snubber Small Snubber Hook Only (5/16" T-316 Stainless Steel Stock)The "Captain Hook" Chain Snubber can be used in a few diffe...

"Captain Hook" Chain Snubber Small Snubber Hook for 1/4" 5/16" Chain with 12' of 1/2" 3 Strand NylonThe "Captain Hook" Chain Snubber can be used i...

Spreader Flag Halyard KitIncludes 40ft. of polyester line, block with bail and shroud cleat.

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" h...

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees.

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1".

Short Adjuster for 3/16" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specifica...

Short Adjuster for 1/8" WireGenerally used at the stern rail in conjunction with the single gate eye to tension that section of the gate.Specificat...

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

"T" Style Toggle Jaw for 1/8" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Deck Toggle "T" Style for 3/16" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.

Deck Toggle "T" Style for 1/8" WireThis fitting can be used wherever a cable needs to be terminated to a deck or bulkhead.